How to fix a broken pin badge?

Pin badges have been a popular fashion accessory for decades, especially in the UK. Union Jack pin badges, butterfly pin badges, personalised pin badges – they have all been popular choices for those who want to make a statement with their fashion choices. Whether you are wearing a featured badge to show your support for a cause, your allegiance to a sports team, or just because you think it looks cool, a broken pin badge can be a real annoyance. Unfortunately, pin badges can get broken over time. Whether it’s from wear and tear, accidental damage, or just being dropped, a broken pin badge can be a real disappointment.


But don’t worry – fixing a broken pin badge is easier than you think. There are ways to fix a broken pin badge and get it looking like new again.


First, it’s important to assess the damage. If the badge is only slightly cracked, bent, or scratched, then it may be possible to fix it with some basic tools and materials. If the pin has been completely broken in half or otherwise severely damaged, then it may not be possible to fix it.

But it's not impossible:If you’re attempting to fix a pin with a broken post, you’ll also need a replacement post. You can purchase replacement posts from many craft stores, or you can purchase them online.


What You’ll Need

Before you begin your repairs, it’s important to make sure you have all of the necessary tools and supplies. Here’s a quick list of what you’ll need:


  • A pair of tweezers
  • A flat-head screwdriver
  • A small, sharp knife
  • A pair of pliers
  • Super glue
  • A soft cloth


Step-by-Step Instructions

Once you’ve gathered all of your tools and supplies, you’re ready to begin your repair. Here’s a step-by-step guide to help you get started:


  1. Start by using the tweezers to carefully remove any remaining pieces of the broken post from the pin.


  1. Once the post has been removed, use the flat-head screwdriver to gently pry the pin open. This will help you get a better look at the inside of the pin, and will make it easier to insert the replacement post.


  1. Now that the pin is open, use the small, sharp knife to carefully shape the hole where the post will be inserted. Make sure the hole is the correct size for your replacement post.


  1. Once the hole is the correct size, use the pliers to carefully insert the replacement post into the pin. Make sure the post is secure, and that it’s not sticking out too far.


  1. To finish the repair, apply a small amount of super glue around the edges of the post. This will help to hold it in place, and will prevent it from coming loose over time.


  1. Finally, use the soft cloth to wipe away any excess glue. Allow the glue to dry completely before wearing the pin.


If the badge is damaged internally, the following methods can be used:


To begin the repair process, gather the materials you’ll need. You’ll need a small flathead screwdriver, a pair of tweezers, some glue, and a cloth. If the badge is metal, you may also want to use some metal epoxy to reinforce it.


Once you have the tools and materials, it’s time to start fixing the badge. If the pin badge is made of metal, use the flathead screwdriver to carefully pry apart the two pieces. Be careful not to damage the pins or the badge itself. Once you have separated the two pieces, use the tweezers to remove any pieces of broken metal or plastic that may be stuck in the badge.


Once the badge has been disassembled, it’s time to start reassembling it. If the badge has a pin on the back, use tweezers to carefully place it in the center of the badge. Then, apply glue to the edges of the badge, ensuring that it is evenly distributed. Finally, press the two pieces together and hold them in place until the glue has dried.


If the badge is made of plastic, use a hot glue gun to assemble the pieces. Heat up the glue gun and apply a small amount of glue to the edges of the badge. Then, press the two pieces together and hold them in place until the glue has dried.


Once the glue has dried, use a cloth to buff the badge. This will help to make the badge look shiny and new. If the badge is metal, you may also want to apply some metal epoxy to the edges of the badge to help reinforce it.


Once the badge has been fixed, it’s time to wear it proudly!


Some people may also want to ask, what should I do if the backing is damaged? Here is the solution:


If your pin badge is made of metal or plastic, all you’ll need is a pair of pliers, a new pin backing, some glue, and a few other basic tools. Start by removing the broken pin backing from the back of the badge. You can do this by using the pliers to gently pull the backing out. Once the backing has been removed, use some glue to attach the new backing to the back of the badge. This should be a relatively simple process – just make sure the backing is securely attached.


Once you have the new backing in place, it’s time to reattach the pin to the badge. The easiest way to do this is to use a pair of tweezers to carefully place the pin onto the back of the badge. Make sure to line up the pin with the backing so it fits snugly in place. Once the pin is in place, you can use some glue to keep it secure.


If your pin badge is made of fabric, such as a union jack pin badge, you’ll need some fabric glue and a pair of scissors. Start by carefully cutting the fabric around the back of the badge, leaving enough fabric to cover the pin. Next, use the fabric glue to attach the fabric to the back of the badge. Make sure to press the fabric firmly against the back of the badge to ensure a secure fit. Once the fabric is in place, you can use the scissors to cut the fabric around the pin, making sure to leave a small gap around the pin so that it can move freely.


For a more secure fit, you can also use a metal or plastic badge backing. This is a small piece of metal or plastic that is placed on the back of the badge and then secured with glue. This is a great option for more intricate badges, such as a butterfly pin badge or a personalised pin badge.


No matter what type of badge you have, Badges UK has a wide range of badge backing pins and other supplies to help you fix your broken pin badge. They also have a variety of fabrics and other materials that you can use to make your own badge. So, if you have a broken pin badge, don’t worry – with the right supplies, you can easily fix it in no time.


Caring for Your Pin Badges

In addition to repairing a broken pin badge, it’s also important to take proper care of your pins. Here are a few tips to help keep your pins in good condition:


  • Store your pins in a cool, dry place.


  • Avoid exposing your pins to water, as this can cause them to rust or corrode.


  • If you’re not wearing your pins, keep them in a safe place where they won’t get damaged.


  • Use gentle cleaning methods, such as a soft cloth, to remove any dirt or debris.


  • Avoid dropping your pins, as this can cause the pins to break.



Pin badges can be a great way to express your personality and show off your favorite hobbies, sports, and causes. Unfortunately, pins can easily break due to regular use. Fortunately, there are ways to repair a broken pin badge. By following the steps above, you can quickly and easily fix your pin badge.

Remember, it’s also important to take proper care of your pins. Store them in a safe place, avoid exposing them to water, and use gentle cleaning methods to keep them looking their best. With a little bit of care and attention, your pin badges can last for years to come.And with a little bit of patience and the right materials, you can fix a broken pin badge and get it looking like new again!